AAMA 611 陽極氧化建筑用鋁非官方技術規范—測試標準

AAMA 611 Voluntary Specification for Anodized Architectural Aluminum

AAMA 611 陽極氧化建筑用鋁非官方技術規范

AAMA 611 陽極氧化建筑用鋁非官方技術規范—測試范圍

This specification describes test procedures and requirements for architectural quality aluminum oxide coatings applied to aluminum extrusions and panels for architectural products. This specification covers anodized finishes produced in batch or continuous coil.

本規范描述了測試程序和建筑質量要求的鋁氧化物涂料適用于鋁合金型材和板材建筑產品。本規范包括陽極完成生產間歇式或連續式線圈。

AAMA 611 陽極氧化建筑用鋁非官方技術規范—檢測項目及方法

AAMA 611 Section 8.1 ASTM B244 or ASTM B487氧化層厚度 Oxide coating thickness

AAMA 611 Section 8.2 ASTM B137氧化層重量和表觀密度 Oxide coating weight and apparent density

AAMA 611 Section 8.3 AATCC 173色彩均勻性 Color uniformity

AAMA 611 Section 8.4 ASTM D523 60℃鏡面光澤度 Gloss uniformity at 60℃

AAMA 611 Section 8.5磨耗測試 Abrasion Resistance (Michael Clark Abrasion Test)

AAMA 611 Section 8.6 ASTM B117 耐腐蝕測試 Corrosion Resistance (鹽霧腐蝕)

AAMA 611 Section 8.7耐候測試 Weathering (南佛羅里達州,北緯27度,45度角面向南方,5年曝曬)

ASTM D2244 Section 6.3顏色保持力 Color retention

ASTM D4214耐粉化性 Chalk resistance

ASTM D523光澤度保持力 Gloss retention

ASTM B244耐侵蝕 Resistance to erosion

AAMA 611 Section 8.8 ASTM B680 or ISO 3210 密封測試 Seal test

AAMA 611 Section 8.9裂紋測試 Craze resistant