費希爾FISHER 92S 型自力式控制閥通過活塞驅動，可適用于高循環(huán)蒸汽應用。92S 型控制閥和指揮器的底座采用研磨表面，經證實可程度地減少底座泄漏。6492H 和 6492L 型指揮器均配有可減少導桿摩擦的波紋管密封閥桿。 鋼和不銹鋼 92S 型控制閥的設定點壓力范圍為 250 psig / 17.2 bar，溫度為 650o F / 343o C。廣州奧麗斯特燃氣設備有限公司是美國FISHER產品華南區(qū)域（廣東?。┌瘓F授權代理商。2020美國FISHER技術選型020*叁貳貳0162張S中國費希爾調壓網 【張工15876552411手機同微XIN】

功能

能夠降噪而不降低流量

良好的關斷性能可減少下游累積

易于安裝

規(guī)格

取壓方式

外取壓

溫度

鑄鐵閥體：406°F / 208°C | 不銹鋼或鋼閥體：500°F / 260°C | 可選高溫鋼或不銹鋼閥體：650°F / 343°C

閥體尺寸

NPS 1 / 1.5 / 2 / 2.5 / 3 / 4 / 6x4 | DN 25 / 40 / 50 / 65 / 80 / 100 / 150x100

端部連接

NPT / CL125FF / CL150RF / CL250RF / CL300RF / CL600RF

入口壓力

鑄鐵：250 PSIG / 17.2 bar | 鋼：300 PSIG / 20.7 bar | 或閥體額定值，以較低者為準

出口壓力

250 PSIG / 17.2 bar

彈簧范圍

39 至 250 PSIG / 2.7 至 17.2 bar

Type 92S self-powered control valves are piston actuated for high cycle steam service.Type 92S control valves and pilot use lapped seating surfaces that have been proven to minimize seat leakage.Types 6492H and 6492L pilots have bellows sealed stems to eliminate stem guide friction. The steel and stainless steel Type 92S control valves are available with a set point range of up to 250 psig / 17,2 bar and a maximum temperature of 650° F / 343° C.

Features

Noise Reduction Capability without Decrease in Capacity

Good Shutoff for Low Downstream Buildup?

Ease of Installation

Specifications

Pressure Registration External

Maximum Temperature Cast Iron Body:?406°F / 208°C | Steel Body: 500°F / 260°C | Optional High-Temperature Steel or Stainless Steel Body: 650°F / 343°C

Body Sizes NPS 1 / 1.5 / 2 / 2.5 / 3 / 4 / 6x4 | DN 25 / 40 / 50 / 65 / 80 / 100 / 150x100

End Connections NPT / CL125FF / CL150RF / CL250RF / CL300RF / CL600RF

Maximum Inlet Pressure Cast Iron: 250 PSIG / 17.2 bar | Steel: 300 PSIG / 20.7 bar | Or body rating limit, whicever is lower

Maximum Outlet Pressure 250 PSIG / 17.2 bar

Spring Ranges 2 to 250 PSIG / 0.138 to 17.2 bar

Fisher China Guangzhou Honest Gas Equipment Co., LTD.

Tel:+86-020-32201622

Mobile phone|weixin:15876552411

E-mail:363495724@qq.com